Plumber Mesa Providing Same-Day Mesa AZ Plumbing Service

If a drain cleaner does not work to clear a clogged drain, there are a few other options to try before calling a plumber.

1. Use a plunger: A plunger can often dislodge clogs that are caused by debris or small blockages. Plunge the drain for several minutes to see if the clog can be removed.
2. Use a snake: A plumbing snake, also called a drain auger, is a long, flexible tool that can be inserted into the drain to break up and remove clogs.
3. Try baking soda and vinegar: Mix a cup of baking soda and a cup of vinegar and pour it down the drain. Let it sit for at least an hour and then flush the drain with hot water.
4. Remove the P-trap: The p-trap is a curved pipe under the sink that can trap debris. Removing the p-trap and cleaning it out can help remove the clog.

If none of these methods work, it may be time to call a professional plumber to assess the situation. They can use specialized tools such as hydro jetting to remove the clog and diagnose the issue.

It’s important to note that using chemical drain cleaners should be a last resort, as they can be corrosive and can damage pipes over time. Additionally, if the clog is caused by a bigger issue such as a broken pipe, pouring chemical cleaners can cause more damage.

You may have been experiencing drainage problems because of clogging. The pipes in your home are old, and can become more prone to blockages as time goes on; this is especially true if you haven’t maintained them properly or had any repairs made recently like upgrading plumbing fixtures with newer models that require different kinds of tools for installation (which we recommend). Slow draining indicates there’s probably an obstruction somewhere – either large pieces stuck between joints throughout the system or backed-up wastewater waiting its turn before flowing off again…both situations need professional attention ASAP!

If you need a trained and skilled plumber don’t hesitate to call us. We are a reliable plumber in Mesa, AZ, and surrounding areas. Contact the Plumbing Bear Today!

If your toilet is making an unusual amount of noise during flushing, it could be because the water flowing into its tank has been restricted somehow. The ballcock assembly that regulates this flow might need replacement or other parts are causing interference with how they work together to make sure you always have enough pressure for things like showers and laundry sink fixtures where we want more than just dripping streams coming out when someone closes their faucet too quickly! If you need an emergency plumber just call the Plumbing Bear in Mesa, AZ.

The best way to prevent pipes from freezing is by making sure your home has proper heating during winter. When it’s too cold, water expands and can cause the plumbing in a house or business that doesn’t have heaters with plugin Night into damage mode! You should also drain all outside valves before closing up inside ones- this will help keep them safe because there won’t be any excess pressure building up within their system if they were left open while waiting for warmer weather (or just being stored). Faucet insulators are another great idea since you’ll spend more time than usual using those pesky handles every single day. If you need help just call the Plumbing Bear in Mesa, AZ.

No, If you hear strange noises coming from your plumbing, it could be a sign of something wrong. Noises such as clanking or rattling mean that pipes are blocked and need to unblock quickly before they cause bigger issues for homeowners like water pressure leaks! Have someone or a professional plumber in the know take care of these problems right away so no one has any unwanted surprises at home due to this week’s snowfall  and low temperatures forecasted by Sunday evening. If you need to encounter these problems contact the most trusted plumber in Mesa, Arizona. Call the Plumber Bear Today!

A plumbing emergency is a situation that requires immediate attention to prevent further damage or a potential health hazard. Some examples of plumbing emergencies include:

1. Burst pipes: A burst pipe can cause significant water damage to a home and should be addressed immediately.
2. Sewer backups: A sewer backup can release raw sewage into a home, which poses a serious health hazard and should be dealt with immediately.
3. Gas leaks: A gas leak can be extremely dangerous and can lead to a fire or explosion. If you suspect a gas leak, you should evacuate the building and call a plumber or gas company immediately.
4. Flooding: A flood caused by a broken pipe or overflowing toilet can cause significant damage to a home and should be addressed as soon as possible.
5. No hot water: A lack of hot water can be a sign of a malfunctioning water heater and can be inconvenient and uncomfortable.
6. Leaking faucet: A leaking faucet or pipe can waste a lot of water and increase your water bill, it should be fixed as soon as possible.

It’s important to note that what may be considered an emergency for one person, may not be for another. However, if you suspect any of the above situations, it’s best to call a plumber immediately. They will be able to assess the situation and take the necessary actions to prevent further damage.

If your push button toilet flush is not working properly, there are a few things you can try to repair it:

1. Check the battery: If your push button toilet flush is battery-operated, check to see if the battery needs to be replaced.

2. Check the linkage: Make sure that the linkage from the button to the flush valve is not disconnected or broken. If it is, you can try to reconnect it or replace it.

3. Check the flush valve: The flush valve is what controls the flow of water into the toilet bowl. Make sure that it is not clogged or damaged. If it is, you may need to replace it.

4. Check the flapper: The flapper is the rubber seal that sits at the bottom of the flush valve and controls the flow of water into the toilet bowl. Make sure that it is not leaking or damaged. If it is, you may need to replace it.

5. Check the diaphragm: The diaphragm is a small rubber or plastic part that sits on top of the flush valve and controls the flow of water into the toilet bowl. Make sure that it is not clogged or damaged. If it is, you may need to replace it.

6. Try cleaning the parts: Sometimes, dirt or debris can accumulate on the parts, causing them to malfunction. Cleaning the parts with a cloth or cleaning brush can help to resolve the issue.

If none of these steps work, or if you are unsure of how to proceed, it is best to call a plumber to diagnose and repair the issue.

It’s important to note that some of the steps may require some plumbing knowledge and tools, and it’s best to call a professional if you’re not confident in your ability to repair it.

A shower diverter is a valve that controls the flow of water between the showerhead and the tub spout. If the diverter is not working properly, it can cause water to come out of both the showerhead and the tub spout at the same time, or to not come out of the showerhead at all. Here are a few steps to try to repair a shower diverter:

1. Check the handle: Make sure the handle is securely attached and not loose. If the handle is loose, tighten any screws or bolts that hold it in place.

2. Check the linkage: The linkage connects the handle to the diverter valve. Make sure the linkage is not bent or broken, and that it is connected securely to both the handle and the valve.

3. Check the valve: The diverter valve is located inside the shower wall. Make sure the valve is not clogged or blocked. If it is, remove any debris and clean the valve.

4. Check the seals: The seals around the diverter valve can wear out over time and cause leaks. Check the seals for any cracks or damage and replace them if necessary.

5. Replace the diverter: If none of these steps resolve the issue, it may be necessary to replace the entire diverter.

It’s important to note that if you’re not comfortable working on plumbing, it’s always best to call a professional plumber to avoid further damage or injury. A professional plumber will be able to diagnose the problem and make the necessary repairs.

Please keep in mind that the steps may vary depending on the type of diverter you have, like a knob diverter or a lever diverter, so it’s important to check the manufacturer’s instructions before attempting any repairs.